Best 3D Printing Tutorials in Canada

This video tutorial will walk you through how to manage and edit materials in Ultimaker Cura.

Cutting the Cord . . . .Remote Printing & Monitoring with Octoprint   Shopping List Raspberry Pi (low powered, headless, all-in-one box) Case Power supply Micro SD card https://www.amazon.ca/LANDZO-Raspberry-Completed-Kits/dp/B01IOVOQ38   Download Software Latest OctoPi image: http://octoprint.org/download/ Etcher tool to burn images to SD cards: https://etcher.io/ PuTTY for SSH connections: http://www.putty.org/   Install Octopi Image Using a computer with an attached SD...

This tutorial is to teach you how to do multi-color prints on your Lulzbot 3D printer with a single extruder.     Watch the video above to walk you through all of the steps for three different ways to produce multi-color prints on your Lulzbot Taz or Lulzbot Mini 3D printer.

Learn how to use Ultimaker Cura 3.0 to calculate the material cost for a given 3D print.

PEI Print Surface: Maintenance Your LulzBot 3D printer is equipped with a PEI print surface. This extremely handy material makes your life easier because you don't have to worry about hair spray and glues to get good bed adhesion with standard materials like PLA and ABS.  The PEI film is adhered to the glass bedplate with a semi-permanent...

How to change the nozzle on your Ultimaker 2+ or Extended+ with an Olson block. This tutorial is meant to walk you through the simple process of changing the nozzle on your Ultimaker 2+ or Ultimaker 2 Extended+ 3D printer. The process is very simple and will only take a few minutes. Tools you will need: Ultimaker...