Product Reviews

Based on 310 reviews
92%
(286)
7%
(23)
0%
(1)
0%
(0)
0%
(0)
A#1

No problem… Everything was fast everything was easy

C
Creality Ender 3 S1 3D Printer
Cliff Smith (Gananoque, CA)

Creality Ender 3 S1 3D Printer

J
Creality Ender 3 S1 3D Printer
James Parks (Girouxville, CA)
First Time Customer, new to printing

I ordered the S1 as my first printer and gave had several successful prints with no issues after I had completed thee setup.

Print Your Mind 3d are fantastic with everything shipping out very quickly. I am in Alberta so everything ships from Calgary with no issues whatsoever. Since ordering, I have been a return customer for filament and was again very pleased with how fast everything shipped to me. I will be a return customer for all my 3D printing purchases.

T
Creality Ender-3 V2 3D Printer
Tony Morgan (St. John's, CA)
Great experience!

Ordered the Creality Ender V2 3D printer and had a great and trouble free experience. Emails were received informing me about the order and shipping info was sent out as soon as it was shipped. I ordered from PYM 3D based on reviews from other customers and will most definitely order from them again! And I almost forgot, it was the lowest price I could find online. 👍

A
TAZ Pro/Workhorse ABS+ Enclosure
Andrew Christenson (Edmonton, CA)
The Enclosure

The enclosure is easy to assemble with clear instructions and diagrams. The machine is easily accessible with the removable front lid(?). Although the noise factor on the machine is considerably reduced, the over performance is not necessarily understood at this point.

A
Creality Ender 3 S1 3D Printer
Alexandre Lusignan (Saint-Eustache, CA)
Don’t hesitate to buy

Very happy with my purchase of an Ender 3 S1. Very good service, best price I’ve seen and fast shipping. I’m really satisfied! Thank you guys!

C
Creality Ender-3 V2 3D Printer
Ceasar Pulvinar (Calgary, CA)
Creality ender 3v2

Great product and great customer service!

C
Creality Ender-3 V2 3D Printer
Canadianllama (Vancouver, CA)
Good process

The buying process went good. I made 2 orders at the same time, then I got an email coupon and I wrote them and asked if it could be applied to the second order and they did it.
Will be buying supplies from them as I need them for sure.

S
Creality Ender-3 V2 3D Printer
Stephanie Mok (Montreal, CA)
Great printer

Upgraded from a monoprice v2 printer to get a bigger build area but was pleasantly surprised at how quiet this printer is. Would recommend the side spool upgrade as the original vertical mount position makes it tricky to find a spot for the printer. Assembly instructions are workable but it helps to have prior experience working with a FDM printer or to look at a few set up videos on youtube.

D
Lulzbot TAZ Pro 3D Printer
Dominique Gravel (Ottawa, CA)
New Taz Pro Printer... results so far are not very good.

Hi, just received the Taz Pro about a week ago and have been printing the test pieces. Stringing is awful (PLA). Have tried temps from 190 to 215 with no improvements. Have tried retractions from 1 to 6 mm and retractions speeds up to 40mm/s, still no good. Took the spool off the Taz Pro and put it on my Taz 5 and printed the same test piece, nearly perfect on the Taz 5 with 2mm retraction and 10mm/s speed and same temperature (195). Something is not right on the Pro... Picture below shows the Taz 5 result on the right side with the other two from the Taz Pro. Will need help from you guys.

A
Creality Ender-3 V2 3D Printer
Andrew Read (Kingsclear, CA)

Printer arrived promptly and everything was in good condition. Set it up that evening and made my first print as a total beginner. Having a great time learning and tinkering.

C
Creality Ender 3 S1 3D Printer
Claudio Tremblay (Montreal, CA)
Perfect

Good Price fast shipping

R
Creality Ender 3 S1 3D Printer
Robert (Cobourg, CA)
Awesome

Printer arrived damage free, and I've been having a great time with it.
I'd highly recommend pym3d to anyone looking for a printer.

M
Creality Ender-3 V2 3D Printer
Micheal Hocaliuk (Kitchener, CA)
Best price!

I searched long and hard for the best price, I found it here! And free shipping too!

S
Creality Ender-3 V2 3D Printer
Stephen Pellerin (Beaver Bank, CA)
Great first 3D printer

Received printer right on time. Assembled using Youtube video. My first print turned out great. Can't wait to print more stuff.

C
Creality Ender 3 S1 3D Printer
Cory Henschke (Port McNeill, CA)
Amazing customer service

Ordered on a Friday morning, Print your Mind noticed a mistake in my order, asked me, corrected it, AND still shipped out on that Friday, I received it early the next week. Great store.

M
Creality CR-10 Smart 3D Printer
Mike O'Krancy (Regina, CA)
Printhead change

I hope it works better than the dual extruder. / Mike O'Krancy

G
Print Your Mind 3D ABS Filament - 1 kg
Gary Gress (Metapenagiag, CA)
It worked out well

After a misunderstanding about the pick-up location, Print Your Mind very generously shipped the items for free to my residence on the East Coast. They even tracked the parcel enroute and let me know when to expect it. Thank you!

And the filament itself is great; I've been using the ABS for several years now for structural components in eVTOL sub-scale aircraft, recently including vertical-lift propellers.

Judge.me YouTube video placeholder
B
Creality Wifi Box
Brandon Pentz (Calgary, CA)

Very good

B
Ultimaker 3D Printer Enhanced Service Plan
Brian Anderson (Edmonton, CA)
Buying the Ultimaker S5 and setup

Happy with the Ultimaker purchase. All question answered without hesitation.
I asked lots of questions before and after buying the S5 that were answered within an hour or less pertaining to Ultimaker Cura or machine setup. I'm happy!

P
Ultimaker PLA Filament - 2.85mm (0.75kg)
Patrick Legault (Montreal, CA)
Gréât shipping

Shipping time was awesome and product was awesome as always :)

M
Creality Ender-3 V2 3D Printer
Mike (Winnipeg, CA)

Very good

M
Creality Ender-3 V2 3D Printer
Morgan Watling (Calgary, CA)

Creality Ender-3 V2 3D Printer

Materials delivered promptly

Materials were delivered promptly and in good shape.

Printhead change

I have just received the dual extruder tool head, and have yet to install it. I also purchased some very pricy Ultimaker filament; flexible and dissolvable from you and am looking for recommendations on its use in a dual extruder configuration.
Regars;
M. O'Krancy, Regina, SK

  • Free Shipping Over $250
  • 100% SSL Secure Payments
  • Professional Customer Support
  • Top in Class Products
You have successfully subscribed!
This email has been registered