Best 3D Printing Tutorials in Canada

  In this tutorial we will walk you through a number of suggested changes you can make to help improve dimensional accuracy when printing on the Ultimaker 3. The basic idea behind this is to slow down the printer, and make a number of settings in Ultimaker Cura more consistent. Following this will help you to see...

    In this tutorial Colin will show you the full process of changing your filament on the Ultimaker 3 3D printer.   We have had a number of instances where customers were having problems after going through the material loading process incorrectly. This tutorial will walk you through the entire process of how to properly change...

  In this tutorial Colin will show you the full process of how to change your tool head on the Lulzbot Taz 6 3D printer.   The tutorial will show changing from the MOARstruder to the standard v2.1 toolhead. If you are still having any problems, or have any questions at all, please feel free to contact...

How to replace the hot end on your Lulzbot Taz 3D printer   At Print Your Mind, we are dedicated to providing the best possible support and assistance to our customers. 3D printers require occasional maintenace and up-keep, so this tutorial will assist you when it comes time to replace the hot end on your Taz printer....

This tutorial will show users of Ultimaker Cura 3.5 or newer how they can customize support structures.    This includes only supporting models exceeding a specific overhang angle, blocking supports where you don't want them, and manually adding custom supports to a specific area.    Download Ultimaker Cura Now

Using Ultimaker 3 as an example, learn how to print with 1 kg spools on your Ultimaker 3 3D printer. Also applicable to Ultimaker S3 and Ultimaker S5!