Gen 3 CarbonX™ CF-Nylon Filament is an advanced semi-aromatic polyamide copolymer reinforced with high-modulus carbon fiber. This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing. Tired of nylon that warps? This is the answer you've been looking for. Excellent dimensional stability comes from the carbon fiber and the semi-aromatic nylon.
High-Performance + High Temp Resistance: Gen3 CarbonX™ CF-Nylon is a PA6 copolymer made using high-modulus carbon fiber and state-of-the-art compounding and extrusion technology. Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.
Open Source: You do not need to purchase a special printer for CarbonX™ CF-Nylon. Our CF Nylon (Gen 3) is suitable for use in practicallyanydesktop 3D Printer that has a heated bed.
Bed Prep: Polyimide Tape, Clean glass with ABS/Acetone Slurry
Hardened Nozzle: 0.4mm or larger.
Layer Height: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers below 0.25mm with carbon fiber grades. Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
Drying Instructions: It is very important to keep this material dry and prevent moisture absorption. Dry this material at a max temperature of 90 degrees C for 4 hours. See our filament dryers here to help with this.
I have come to trust both the products these guys offer and their service. They seem to not sell items if they find there's a better alternative and they also seem to manually check orders before sending them out. By so doing they recently thought to call me to confirm that the order I had made (and had been confirmed electronically) was in fact correct. Not surprisingly it wasn't; wrong filament size! They saved me losing time and money (and stopped me getting very frustrated). Brilliant service