Only Top Quality Products
Only products from trusted brands
We respond within 24 hours
100% SSL Secure Payments
Free shipping on orders $99.99+
Taulman - Green T-Glase PETT Filament - 2.85mm
This material is a industrial high strength, low temperature material made from PETT. It is designed for users who normally print with lower temperature materials, but are looking for a high strength features. This also offers very high clarity and light transmission found in translucent filaments. T-Glase is much more rigid than other Taulman3D filaments such as their nylon 618 and 645 which can be quite bendable making it similar to ABS or PLA.
"T-glase is also a high strength polymer meant for industrial applications. The major advantage of t-glase to all other polymers, is layer to layer bonding. Because the polymer bonds so well, there is no need to smash a large number of thin layers together to accommodate a good bond. Industry uses layer settings that are 50% to 80% of the nozzle dia with excellent results. t-glase has a very low shrinkage factor and is best printed on glass print beds heated from 60C to 80C depending on part size. t-glase also prints easily on glass heated to 45C and using a thin coat of PVA (Elmers Glue All) As with nylon 645, 680 and 910, the clarity of t-glase supports industrial non-destructive evaluations. In addition, t-glase is a directly printable polymer for glass clear jewelry.
FDA approved – t-glase is specifically made of FDA approved polymers for direct food contact/containers. This includes cups and other liquid storage parts as well as utensils.
Clarity – t-glase is considered colorless per industrial classifications. t-glase is considered "water clear" as it will not degrade to a color in multiple layters of applied thickness. t-glase’s clarity supports industry’s requirements for non-destructive evaluation of 3D Printed parts.
Shrinkage - Very low shrinkage makes printing large flat surfaces a breeze. And it easily prints to acrylic, glass, Kapton and other platforms.
Bridging - Those of us that have printed with acrylics and poly carbonates are always envious of their bridging capabilities due to glass temperature. And the new t-glase is very impressive at bridging.
Fumes - Unlike some lines, there are no odors or fumes when 3D Printing with t-glase."
From Taulman 3D
STORAGE: Every order comes with one large resealable bag with slider + an extra desiccant included. It is important to store your filaments in a dry area to avoid moisture absorption when not in use. The bag and desiccant ensure your filaments stay dry and free of dust & dirt to make sure your next project prints without a hitch.
Print temp = 238C - 245C
Nozzle = any size
Print speed = ABS speeds - slower for high detailed prints
Retraction = 3-4mm
Print bed = Hot = Glass heated to 45C with coat of PVA
NOTE: It is best "NOT" to let the bed cool to ambient, but only down to 35C in end of g-code.
This will reduce glass breakage.
*All Taulman3D materials are made in the U.S.
*All T-Glase filaments come in 1 lb spools
*For further information on T-Glase, check out the Taulman 3D website.
*Print Your Mind 3D is an authorized Canadian distributor of Taulman 3D products.