A high strength PETG developed for design engineering and architectural use.
Tech-G is a PETG filament which is meant to offer even higher strength than regular PETG, while providing limited elongation.
From Taulman 3D:
Recommended Printing Settings
Print temp = 238C - 245C
Nozzle = any size
Print speed = ABS speeds - slower for high detailed prints
Retraction = .5mm/.1mm nozzle or for a .5mm nozzle = 2.5mm
Print bed = Hot = Glass heated to 45C with coat of PVA
NOTE: It is best "NOT" to let the bed cool to ambient, but only down to 35C in end of g-code.
This will reduce glass breakage.
STORAGE: Every order comes with one large resealable bag with slider + an extra desiccant included. It is important to store your filaments in a dry area to avoid moisture absorption when not in use. The bag and desiccant ensure your filaments stay dry and free of dust & dirt to make sure your next project prints without a hitch.
*All Taulman3D materials are made in the U.S.
*All Tech-G filaments come in 1 kg spools
*For further information on Tech-G, check out the Taulman 3D website.
*Print Your Mind 3D is an authorized Canadian distributor of Taulman 3D products.