This is an ideal material for any projects that will be exposed to high heat. It is designed to withstand high temperatures while maintaining it's shape.
"BluPrint is a specialty polymer developed to specifically handle high heat deflection requirements. With a Tg of 110C and a print temp of only 265C, BluPrint is an easy to print polymer that comes as a clear material similar to t-glase.
Antique car/item lenses or light covers, i.e. tail light, turn signal, etc..
Any use in high heat environment
Any part that will need to be placed in boiling water for preparation.
BluPrint can sustain boiling water for 5 continuous hours. Clarity will be lost after 2 hours to a dull haze. Structure will be maintained. "
From Taulman 3D
Recommended Taulman BluPrint Filament
Print temp = 265C - 270C
Nozzle = any size
Print speed = ABS speeds
Retraction = .5mm/.1mm nozzle or for a .5mm nozzle = 2.5mm
Print bed = Hot = Glass heated to 95C
Cold = Clean BuildTak or PEI heated to 90C
STORAGE: Every order comes with one large resealable bag with slider + an extra desiccant included. It is important to store your filaments in a dry area to avoid moisture absorption when not in use. The bag and desiccant ensure your filaments stay dry and free of dust & dirt to make sure your next project prints without a hitch.
*All Taulman3D materials are made in the U.S.
* All BluPrint filaments come in 1 lb spools
*For further information on BluPrint, check out the Taulman 3D website.
*Print Your Mind 3D is an authorized Canadian distributor of Taulman 3D products.