*Compatibility alert* TAZ 5 users with a tool head wiring harness with four (4) connectors will need an additional accessory: LulzBot TAZ 5 v2c Tool Head Harness
Bigger. Faster. Stronger. MOAR: The LulzBot TAZ MOARstruder Tool Head
is a high output tool head with an extra-long heater block, dual print cooling fans, and a 1.2 mm diameter nozzle. These features enable high-speed printing and tough 3D printed objects.
Like all LulzBot tool heads, this uses an open (non-proprietary) filament format, which means you can stay on the cutting edge of the 3D printing industry and adopt new materials as they become available.
Works with: LulzBot TAZ 6
This high-output tool head uses an extra-long heater block and a 1.2 nozzle diameter to increase the 3D printing rate to over 100 grams an hour-- that's a kilogram (2.2 pounds) in 10 hours, and over 2.27 kilograms (5 pounds) of filament in a 24 hour period. Further improvements include a stronger extruder idler latch and a stiffer tool head mount.
The LulzBot TAZ MOARstruder Tool Head is perfect for large objects that utilize the full build area of the LulzBot TAZ, due to the large nozzle diameter. This allows for layer heights of 0.3 mm to 1.2 mm and for thicker extrusion widths, leading to stronger internal structures and single-walled printed objects, like vases, pipes, and containers. 3D print with smaller layers for strong walls and infill.
LulzBot TAZ MOARstruder Tool Head v2 (Fully Assembled)
Wade's Accessible Extruder
LulzBot TAZ Extruder Mount
t-glase sample material for first print
M3 mounting screw, 20 mm (0.79 in) long, with washer
Required filament diameter: 3 mm
Hot end temperature range: 120°C - 300°C
Recommended Layer Heights: 0.3 mm (0.01 in) - 1.2 mm (0.05 in)
Nozzle diameter: 1.2 mm
Required power system: 24 V
Fans: Heat sink and dual print-cooling fans included