Zoom the image with the mouse
  • Only Top Quality Products

    Only products from trusted brands

  • Personalized Services

    We respond within 24 hours

  • Secure Payment

    100% SSL Secure Payments

  • Canadawide Shipping

    Free shipping on orders $99.99+

TAZ Pro/Workhorse ABS+ Enclosure

Lulzbot
10.35
Online only or drop shipped product
$595.00 CAD
$595.00 CAD

Enclose Your Lulzbot TAZ Pro or Workhorse

 

Use this ABS acrylic 3D printer enclosure with your LulzBot TAZ Pro or Workhorse to minimize warping and cracking caused by printing in cold and drafty environments, while keeping curious hands and paws away from the heated and moving parts of your 3D printer. This new 3D printer enclosure features a strengthened design with ABS panels, LulzBot branded laser-etched acrylic, and comes ready to assemble with all components provided (no 3D printing required).

Perfect for:  

  • Cold and/or drafty environments
  • Printing materials with high shrink rates, like ABS, Nylons (Polyamides), and Polycarbonates
  • Classrooms, libraries, and high-traffic areas with curious hands

    Lulzbot TAZ Pro/Workhorse Enclosure Features: 

    This enclosure is made with optically clear, lightweight 3mm thick extruded acrylic and rugged ABS panels. Assembly and installation is easy as this kit contains all the necessary hardware, including the 3D printed corner brackets.

    Advanced users can mount a 40 mm fan to vent air from the enclosure, add filtration, and more. When assembled, this enclosure only adds 63.5mm (2.5in) along the length of the Y-axis (front to back).

    Parts Included

    Laser cut, extruded 3 mm thick acrylic sheets and ABS panels

    Two (2) Part A: Top Mount with holes PDF SVG

    Two (2) Part B: Shelf PDF SVG

    Two (2) Part C: Short Panel PDF SVG

    Two (2) Part D: Main Panel PDF SVG

    Two (2) Part E: ABS Bottom PDF SVG

    One (1) Part F: TAZ Pro Machine Side PDF SVG

    One (1) Part WF: TAZ Workhorse Machine Side PDF SVG

    One (1) Part G: Top Cover acrylic PDF SVG

    Two (2) Part H: ABS Top Front and Back PDF SVG

    Two (2) Part I: ABS Top Sides PDF SVG

    One (1) Part J: ABS Rear Left / Pro and Workhorse PDF SVG

    One (1) Part K: ABS Front Left TAZ Pro PDF SVG

    One (1) Part WK: ABS Front Left TAZWorkhorse PDF SVG

    One (1) Part L: ABS Front Right PDF SVG

    One (1) Part M: ABS Rear Right / Pro and Workhorse PDF SVG

    70 M3 10 mm Bolts

    70 M3 Square Nuts

    4 M4 8 mm Bolts

    4 M4 Square Nuts

    8 M5 20 mm Bolts

    5 Printed Brackets

    LulzBot TAZ Pro-Workhorse ABS+ Enclosure by Printed Solid is licensed CC-BY-SA 4.0 International by David Randolph and printedsolid.com

    Tools Needed

    3 mm hex driver for M3 screws

    4 mm hex driver for M4 screws

    4 mm hex driver for M5 screws

    Optional: Painters tape

    Optional: Flat razor

     

    Time Required

    2-3 hours, based on skill level

     

    Physical Dimensions

    LulzBot TAZ Pro Operating Dimensions (Standard): 83.2 cm x 71 cm x 52 cm (32.76 in x 28 in x 20.47 in)

    LulzBot TAZ Pro Operating Dimensions (with Enclosure): 83.2 cm x 77.47 cm x 52 cm (32.76 in x 30.5 in x 20.47 in)

    LulzBot TAZ Workhorse Operating Dimensions (Standard): 83.2 cm x 71 cm x 52 cm (32.76 in x 28 in x 20.47 in)

    LulzBot TAZ Workhorse Operating Dimensions (with Enclosure): 83.2 cm x 77.47 cm x 52 cm (32.76 in x 30.5 in x 20.47 in)

    Enclosure adds an additional 63.5 mm (2.5 in) along the Y-axis (from front to back).

    Warnings

    Acrylic can easily crack - do not over tighten the screws. Tighten to hold without movement.

    When cleaning, use dish soap or hand wash and a soft, clean cloth. Do not use Windex® or other glass cleaning solutions. Do not use a hard sponge, scrub, or abrasive surface. 

    Windex is a registered trademark of S.C. Johnson, Inc.

     

    More Information

    Assembly Instructions

    Printed Solid Website

    Source Files

    Source

    Printed Part Files

    3D printed TAZ Pro rear right bracket(STL)

    3D printed Taz Pro/Workhorse front left bracket (STL)

    3D printed TAZ Pro/Workhorse front right/rear left bracket (STL)

    3D printed TAZ Workhorse rear right bracket (STL)

    TAZ Pro/Workhorse brackets by David Randolph and PrintedSolid.com used under the CC BY-SA 4.0 license. See Step 5 of the Assembly Instructions .

     

    Emissions and Ultrafine Particles

    This is an enclosure designed to minimize the effects of the ambient environment around your printer and keep curious hands and paws away from the heated and moving components of your 3D printer. It does include a built-in location for mounting a 40mm fan to vent air from the chamber and further modifications can be made.

    On this subject, Printed Solid notes:

    "Some designs use things like HEPA filters to reduce films for things like ABS, HEPA filters are not rated for the ultrafine particles (UFP) that people are concerned about with ABS. A better approach for managing these particles (aside from simply not using ABS) is to maintain a small pressure differential so that the enclosure is at a lower pressure than the room and particles do not flow out. You would then tie this exhaust into exhaust leaving the room."

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    A
    Andrew Christenson (Edmonton, CA)
    The Enclosure

    The enclosure is easy to assemble with clear instructions and diagrams. The machine is easily accessible with the removable front lid(?). Although the noise factor on the machine is considerably reduced, the over performance is not necessarily understood at this point.

    TAZ Pro/Workhorse ABS+ Enclosure
    • Free Shipping Over $250
    • 100% SSL Secure Payments
    • Professional Customer Support
    • Top in Class Products
    ic-expand
    You have successfully subscribed!
    This email has been registered