"In-PLA, which is formerly known as PLAdium is Taulman3D's new high strength PLA. Taulman3D wanted to develop a 3D printed PLA that meets the bonding and strength requirements of all Taulman3D materials. We found newer PLAs developed as a replacement for PETG in packaging "blister packs". This material was developed originally as a replacement for PETG and fully meets the strength requirement, and just as important, it is a non-yellowing PLA. PLAdium prints at 210C-230C and follows all other PLA printing methods. Unlike other Taulman3D materials, we are releasing PLAdium on 1kg spools. PLAdium is an engineering PLA in that with the additional size sensors and non-yellowing clear material, both high strength as well as non-destructive evaluation are available to the end user/design house."
From Taulman 3D
Recommended Printing Settings
Print temp = 207C - 212C
Nozzle = any size
Print speed = ABS speeds
Retraction = .5mm/.1mm nozzle or for a .5mm nozzle = 2.5mm
Print bed = Hot = Glass heated to 70C
NOTE: It is best "NOT" to let the bed cool to ambient, but only down to 35C in end of g-code.
This will reduce glass breakage.
STORAGE: Every order comes with one large resealable bag with slider + an extra desiccant included. It is important to store your filaments in a dry area to avoid moisture absorption when not in use. The bag and desiccant ensure your filaments stay dry and free of dust & dirt to make sure your next project prints without a hitch.
*All Taulman3D materials are made in the U.S.
*All In-PLA filaments come in 1 kg spools
*For further information on In-PLA, check out the Taulman3D website.
*Print Your Mind 3D is an authorized Canadian distributor of Taulman 3D products.