Announcing The Lulzbot Taz MOARstruder

Print Up To 5 Times Faster With The Lulzbot Taz MOARstruder Tool head

Lulzbot Taz MOARstruder

The Lulzbot Taz MOARstruder is a high output tool head with an extra-long heater block, dual print cooling fans, and a 1.2 mm diameter nozzle. These features enable high-speed printing and tough 3D printed objects.

Like all LulzBot tool heads, this uses an open (non-proprietary) filament format, which means you can stay on the cutting edge of the 3D printing industry and adopt new materials as they become available.

Print up to 5 times faster with the Lulzbot Taz MOARstruder

This high-output tool head uses an extra-long heater block  and a 1.2 nozzle diameter to increase the 3D printing rate to over 100 grams an hour-- that's a kilogram (2.2 pounds) in 10 hours, and over 2.27 kilograms (5 pounds) of filament in a 24 hour period. Further improvements include a stronger extruder idler latch and a stiffer tool head mount.

The LulzBot TAZ MOARstruder Tool Head is perfect for large objects that utilize the full build area of the LulzBot TAZ, due to the large nozzle diameter. This allows for layer heights of 0.3 mm to 1.2 mm and for thicker extrusion widths, leading to stronger internal structures and single-walled printed objects, like vases, pipes, and containers. 3D print with smaller layers for strong walls and infill.

Learn More

Leave a comment

Please note, comments must be approved before they are published

Search

Just added to your cart:
Qty:
Total:
Subtotal:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist